1 #!/bin/sh
   2 #
   3 # CDDL HEADER START
   4 #
   5 # The contents of this file are subject to the terms of the
   6 # Common Development and Distribution License (the "License").
   7 # You may not use this file except in compliance with the License.
   8 #
   9 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
  10 # or http://www.opensolaris.org/os/licensing.
  11 # See the License for the specific language governing permissions
  12 # and limitations under the License.
  13 #
  14 # When distributing Covered Code, include this CDDL HEADER in each
  15 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  16 # If applicable, add the following below this CDDL HEADER, with the
  17 # fields enclosed by brackets "[]" replaced with your own identifying
  18 # information: Portions Copyright [yyyy] [name of copyright owner]
  19 #
  20 # CDDL HEADER END
  21 #
  22 #
  23 # Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
  24 # Use is subject to license terms.
  25 #
  26 
  27 smf_present () {
  28         [ -r /etc/svc/volatile/repository_door ] && \
  29             [ ! -f /etc/svc/volatile/repository_door ]
  30 }
  31 
  32 smf_clear_env () {
  33         unset \
  34                 SMF_FMRI \
  35                 SMF_METHOD \
  36                 SMF_RESTARTER \
  37                 SMF_ZONENAME
  38 }
  39 
  40 # smf_console
  41 #
  42 #   Use as "echo message 2>&1 | smf_console".  If SMF_MSGLOG_REDIRECT is
  43 #   unset, message will be displayed to console.  SMF_MSGLOG_REDIRECT is
  44 #   reserved for future use.
  45 #
  46 smf_console () {
  47         /usr/bin/tee ${SMF_MSGLOG_REDIRECT:-/dev/msglog}
  48 }
  49 
  50 # smf_zonename
  51 #
  52 #  Prints the name of this zone.
  53 
  54 smf_zonename() {
  55         echo "${SMF_ZONENAME:=`/sbin/zonename`}"
  56 }
  57 
  58 # smf_is_globalzone
  59 #
  60 #  Returns zero (success) if this is the global zone.  1 otherwise.
  61 #
  62 smf_is_globalzone() {
  63         [ "${SMF_ZONENAME:=`/sbin/zonename`}" = "global" ] && return 0
  64         return 1
  65 }
  66 
  67 # smf_is_nonglobalzone
  68 #
  69 #  Returns zero (success) if this is not the global zone.  1 otherwise.
  70 #
  71 smf_is_nonglobalzone() {
  72         [ "${SMF_ZONENAME:=`/sbin/zonename`}" != "global" ] && return 0
  73         return 1
  74 }
  75 
  76 # smf_configure_ip
  77 #
  78 #  Returns zero (success) if this zone needs IP to be configured i.e.
  79 #  the global zone or has an exclusive stack.  1 otherwise.
  80 #
  81 smf_configure_ip() {
  82         [ "${SMF_ZONENAME:=`/sbin/zonename`}" = "global" -o \
  83          `/sbin/zonename -t` = exclusive ] && return 0
  84         return 1
  85 }
  86 
  87 # smf_dont_configure_ip
  88 #
  89 #  Inverse of smf_configure_ip
  90 #
  91 smf_dont_configure_ip() {
  92         [ "${SMF_ZONENAME:=`/sbin/zonename`}" != "global" -a \
  93          `/sbin/zonename -t` = shared ] && return 0
  94         return 1
  95 }
  96 
  97 # smf_dont_configure_vt
  98 #
  99 #  Returns zero (success) if vt functionality is not to be configured,
 100 #  1 otherwise.
 101 #
 102 smf_dont_configure_vt() {
 103         [ "${SMF_ZONENAME:=`/sbin/zonename`}" != "global" ] && return 0
 104         /usr/lib/vtinfo > /dev/null 2>&1
 105         return $?
 106 }
 107 
 108 # smf_is_system_labeled
 109 #
 110 #  Returns zero (success) if system is labeled (aka Trusted Extensions).
 111 #  1 otherwise.
 112 #
 113 smf_is_system_labeled() {
 114         [ ! -x /bin/plabel ] && return 1
 115         /bin/plabel > /dev/null 2>&1
 116         return $?
 117 }
 118 
 119 # smf_netstrategy
 120 #   -> (_INIT_NET_IF, _INIT_NET_STRATEGY)
 121 #
 122 #   Sets _INIT_NET_IF to the name for the network-booted
 123 #   interface if we are booting from the network.  _INIT_NET_STRATEGY is
 124 #   assigned the value of the current network configuration strategy.
 125 #   Valid values for _INIT_NET_STRATEGY are "none", "dhcp", and "rarp".
 126 #
 127 #   The network boot strategy for a zone is always "none".
 128 #
 129 smf_netstrategy () {
 130         if smf_is_nonglobalzone; then
 131                 _INIT_NET_STRATEGY="none" export _INIT_NET_STRATEGY
 132                 return 0
 133         fi
 134 
 135         set -- `/sbin/netstrategy`
 136         if [ $? -eq 0 ]; then
 137                 [ "$1" = "nfs" -o "$1" = "cachefs" ] && \
 138                         _INIT_NET_IF="$2" export _INIT_NET_IF
 139                 _INIT_NET_STRATEGY="$3" export _INIT_NET_STRATEGY
 140         else
 141                 return 1
 142         fi
 143 }
 144 
 145 #
 146 # smf_kill_contract CONTRACT SIGNAL WAIT TIMEOUT
 147 #
 148 #   To be called from stop methods of non-transient services.
 149 #   Sends SIGNAL to the service contract CONTRACT.  If the
 150 #   WAIT argument is non-zero, smf_kill_contract will wait
 151 #   until the contract is empty before returning, or until
 152 #   TIMEOUT expires.
 153 #
 154 #   Example, send SIGTERM to contract 200:
 155 #
 156 #       smf_kill_contract 200 TERM 
 157 #
 158 #   Since killing a contract with pkill(1) is not atomic,
 159 #   smf_kill_contract will continue to send SIGNAL to CONTRACT
 160 #   every second until the contract is empty.  This will catch
 161 #   races between fork(2) and pkill(1).
 162 #
 163 #   Returns 1 if the contract is invalid.
 164 #   Returns 2 if WAIT is "1", TIMEOUT is > 0, and TIMEOUT expires.
 165 #   Returns 0 on success.
 166 #
 167 smf_kill_contract() {
 168 
 169         time_waited=0
 170         time_to_wait=$4
 171 
 172         [ -z "$time_to_wait" ] && time_to_wait=0
 173 
 174         # Verify contract id is valid using pgrep
 175         /usr/bin/pgrep -c $1 > /dev/null 2>&1
 176         ret=$?
 177         if [ $ret -gt 1 ] ; then
 178                 echo "Error, invalid contract \"$1\"" >&2
 179                 return 1
 180         fi
 181 
 182         # Return if contract is already empty.
 183         [ $ret -eq 1 ] && return 0
 184 
 185         # Kill contract.
 186         /usr/bin/pkill -$2 -c $1
 187         if [ $? -gt 1 ] ; then
 188                 echo "Error, could not kill contract \"$1\"" >&2
 189                 return 1
 190         fi
 191 
 192         # Return if WAIT is not set or is "0"
 193         [ -z "$3" ] && return 0
 194         [ "$3" -eq 0 ] && return 0
 195  
 196         # If contract does not empty, keep killing the contract to catch
 197         # any child processes missed because they were forking
 198         /usr/bin/sleep 5
 199         /usr/bin/pgrep -c $1 > /dev/null 2>&1
 200         while [ $? -eq 0 ] ; do
 201                 
 202                 time_waited=`/usr/bin/expr $time_waited + 5`
 203                 
 204                 # Return  if TIMEOUT was passed, and it has expired
 205                 [ "$time_to_wait" -gt 0 -a $time_waited -ge $time_to_wait ] && \
 206                     return 2
 207                 /usr/bin/pkill -$2 -c $1
 208                 /usr/bin/sleep 5
 209                 /usr/bin/pgrep -c $1 > /dev/null 2>&1
 210         done
 211 
 212         return 0
 213 }
 214 
 215 #
 216 # smf(5) method and monitor exit status definitions
 217 #   SMF_EXIT_ERR_OTHER, although not defined, encompasses all non-zero
 218 #   exit status values.
 219 #
 220 SMF_EXIT_OK=0
 221 SMF_EXIT_ERR_FATAL=95
 222 SMF_EXIT_ERR_CONFIG=96
 223 SMF_EXIT_MON_DEGRADE=97
 224 SMF_EXIT_MON_OFFLINE=98
 225 SMF_EXIT_ERR_NOSMF=99
 226 SMF_EXIT_ERR_PERM=100